: It is recommended that the WB range of electrodes are stored in a dry heated store at a minimum
temperature of 18°C and a maximum relative humidity of 60%. To avoid damage to the coatings no more
than 6 cartons should be stacked on top of another
On Mon, Sep 24, 2012 at 10:10 AM, Bharat Kumar <asopa.bharat@gmail.com> wrote:
Dear Mr Naresh,Before using the electrodes, one has to pre- heat them in order to remove the moisture from the electrodes. If the electrodes are not kept in non-humidity controlled environment, there is always a possibility to absorb more moisture and thus during welding, problems arises.--
On Sun, Sep 23, 2012 at 8:43 PM, ashpaksavanur@gmail.com <ashpaksavanur@gmail.com> wrote:
Dear Mr Naresh
you should store your electrodes in a humidity controlled stored storage room
With Best regards
Ashpak Savanur
-----Original message-----
From: Naresh Kumar
Sent: 22/09/2012, 8:32 pm
To: materials-welding@googlegroups.com
Subject: [MW:15362] Consumable storage in AC room
Dear experts,
Whether welding consumable storage in air-conditioned
(AC) room is acceptable,including low hydrogen and SS electrodes. Ex: E9018-B9,E7018-1,E316L
etc.,
Thanks & Regards,
Naresh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Thanks & Regards,A Bharat Kumar
Thanks & Regards,
A Bharat Kumar
+91 9989717650
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments