[MW:15418] RE: 15417] HARDNESS and Macro location

Dear Sasi,

You can ask the lab to do hardness testing on weld metal, HAZ and parent Metal, the location shall be weld top, weld middle and weld bottom same with HAZ.

 

With kind regards,

Vinod Kataria

General Manager

Bliss Anand Private Limited,

92B/93B Sector 5

IMT Manesar,Gurgaon,

National Capital Region Delhi.

India .

Phone : +91-124-4366000 (9 Lines)

Mobile Phone : +91-9560199004

Fax : +91-124-2290884

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Sasi
Sent: Friday, September 28, 2012 3:22 PM
To: materials-welding@googlegroups.com
Subject: [MW:15417] HARDNESS and Macro location

 

Dear sirs

 

I already done Procedure Qualification Test as per ASME Sec IX and sent it for mechanical and Destructive testing. The LAB people they are saying to detemine the location of Hardness testing and Macro testing. How I can reply to them. Please advise me . Quick reply , it will be very useful to me.

 

 

Thanks and Regards

Sasikumar.R

 

This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient of this communication, we request you to notify the sender immediately by return email and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited.

The recipient acknowledges that Punj Lloyd Limited or its subsidiaries and associated companies (collectively "Punj Lloyd Group") are unable to exercise control or ensure or guarantee the integrity of/over the contents of the information contained in e-mail transmissions and further acknowledges that any view, opinion or advice expressed in this message are those of the individual sender and no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of Punj Lloyd  Group.

Although we have taken all reasonable precautions to ensure that this communication is free from viruses. We do not assume responsibility for any loss or damage arising from the use of this email.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.