Check composition is correct or not. provide additional vent hole...
Thanks & Regards
Muhammed Ibrahim PK
On 14 September 2012 19:22, Shiv Dutt Mishra Mishra <gopu301182@gmail.com> wrote:
Dear Experts,
Please help me in the mention issue-
We are doing sand casting for the Truck Frame.After all giving proper
chills at all the corners,maintaining low pouing temperatures and
doing process of opening mold after standard opening & knock out,we
are getting the cracks in different locations.Can you help me on this
by giving your valueable suggestions that how we can reduce the cracks
& what could be the reason for the same??
Thanks in advance.
--
Thanks,
S.D.Mishra
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment