Mr. You can use it No problem for that Regards, Muthuvel.A Mob:9687674475
--- On Sat, 17/3/12, asad azmi <azmiasadayub@gmail.com> wrote:
From: asad azmi <azmiasadayub@gmail.com>
Subject: [MW:13904] use of E 7018 -1 & ER 70S-6 to weld SA 516 GR 70 MATERIAL
To: materials-welding@googlegroups.com
Date: Saturday, 17 March, 2012, 1:53 PM
Dear All, Vessel is being fabricated as per ASME SEC VIII DIV 1. Base material - SA 516 GR 70 HIC - 30 mm Thk. IMPACT TEST not required. normally we are using E 7018 for SMAW, ER 70S2 for GTAW & F7P8 EH12K for SAW Process to weld above base material. Can we use E7018-1 for SMAW, ER 70 S6 for GTAW & F7P8 EH12K for SAW for the above base material. Please Advice. Thanks & Regards Asad Azmi -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment