[MW:13613] Re: Applicability of Impact testing for Non pressure parts welded on non pressure parts (inside the vessel)

dear aly,

what absorb from ur mail is u mean to say WPS to be impact tested
correct.Then non pressure welding does not requre impact tested.u can
use WPS without having a impact tested.

regards,
mohd.

On Feb 4, 9:05 am, "Aly" <mhaskar....@gmail.com> wrote:
> Dear Expert,
>
> Kindly advise on following;
>
> Suppose I have a vessel with MDMT minus 48deg C, we have support plate (SP1)
> (inside the vessel) welded with vessels, on which I am going to weld another
> support plate (Sp2),
>
> My question is whether this (SP1 & SP2) required to have impact tested to
> minus 46deg C or only SP1?
>
> Similarly would saddle supports of this vessel require matl with impact
> testing.
>
> Thank you in advance..
>
> Ali Mhaskar
> UAE
>
>  imstp_animation_butterflies_en_020908.gif
> 42KViewDownload

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.