Friday, February 24, 2012

[MW:13776] SS welding with SAW

Dear Experts,
Could anyone suggest me about the followings for stainless steel SAW welding to reach >0.38mm %LE at -196deg. cen.

 

  1. Limitation of wire composition for ER308L grade wire.
  2. SAW welding parameters. (A/V/Speed)
  3. Preheating & Heat input for more than 50mm thick plate.
  4. Any other special requirement.

 

Rgd

Pawan Tiwari

 

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35501] TEST COUPON ASME SEC IX

Yes, You can machine the Plate.  Prepare the Welding Running Sheet and mention 14 mm Plate machined to 8 mm Plate.  then the groove weld qua...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...