Yes, or arrive at some understanding with your client to take hardness and waive it Or contact the manufacturer to get it included for re-issuing the MTC. --- On Wed, 1/6/11, qaqcmpm <mamujeebali@gmail.com> wrote:
From: qaqcmpm <mamujeebali@gmail.com>
Subject: [MW:11234] Heat Treatment information in MTC for ASTM A53B pipe
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Wednesday, 1 June, 2011, 7:19 PM
As per ASTM standard, ERW pipe (ASTM A53B) shall be heat treated above 540 deg c. But if the heat treatment information is not available in the MTC, is it a Non conformance? -- To post to this group, send email to materials-welding@googlegroups.comTo unsubscribe from this group, send email to materials-welding+ unsubscribe@googlegroups.comFor more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment