support overlapping /coinciding with butt weld is not allowed.
At least 25 mm gape to be maintained between two welds.
On 3 February 2011 13:19, Johnson Madukayil <jmadukayil@gmail.com> wrote:
Hello,
I have a case where the edge of the saddle of a pipe support coincides with the pipe's butt weld. Code is B31.1-2007. The edge is supposed to be fillet welded onto the pipe.
Is this permissible?
Thanks
Johnson
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment