I think THE ACCEPTANCE LEVEL for compositional elements is as per the applicable spec and reliability of a PMI reading is as given earlier by Mr Raghuram. So, you need to have standard samples for the elements you want to check using a given PMI unit. Something like in house calibration. Shashank Vagal
--- On Thu, 9/12/10, PREM SHANKARDUTT NAUTIYAL <prem_nautiyal@rediffmail.com> wrote:
From: PREM SHANKARDUTT NAUTIYAL <prem_nautiyal@rediffmail.com> Subject: Re: [MW:8648] Acceptance criteria in alloys in pmi testing below specified limits To: materials-welding@googlegroups.com Date: Thursday, 9 December, 2010, 6:04 PM
Hi What is the material form you are referring to of SS316L: plate, pipe, forging,fitting, welds,....... ?? As per that you have to refer relevant standard for acceptance criteria. Regards Prem Nautiyal On Thu, 09 Dec 2010 17:26:35 +0530 wrote >Dear All, can u tell me what is the acceptance criteria for the Ni,Cr & Mo content below specified values in pmi testing in SS316 L material.And which standard relates to it.How much deviation we can accept. SDM -- Thanks, S.D.Mishra Mob- 09589444897 (M.P./C.G.) 09766916581 (Maharastra) -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. PREM S NAUTIYAL CELL : 9769316004 -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment