ABS spec. is only upto 100 mm .
Beyond that, we need to get approval from the ABS for the every piece based
on the longi & trans direction CVN & Tensile results
Thanks & Regards,
K. Babu
Singapore
----- Original Message -----
From: "israr" <ahmedisrar.nm@gmail.com>
To: "Materials & Welding" <materials-welding@googlegroups.com>
Sent: Sunday, December 05, 2010 9:59 PM
Subject: [MW:8508] Re: Thk >110 mm , what will requirement of mechanical
properties
> Dear Babu,
> At present I do not have ABS Spec. But I know that 36 indicate 3600PSI
> Yield Strength.
>
> Regards
> Israr Ahmed
> +919930308261
>
> Kathalingam Babu wrote:
>> Hi all
>>
>> Is anybody have the mechanical properties of Cabon steel (ABS EH36) or
>> any carbon steels , thk greater than 110 mm
>>
>> The application is Off Shore Structure.
>>
>> Thanks & Regards,
>>
>> K. Babu
>> Singapore
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment