Wednesday, November 3, 2010

RE: [MW:8028] Charpy Notch test for line pipe

It depends on your construction code, what is your construction code?

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Chandra Bhusan Tripathi
Sent: Wednesday, November 03, 2010 11:52 AM
To: materials-welding@googlegroups.com
Subject: [MW:8027] Charpy Notch test

 

Can anyone advise me how to determine the charpy requirement for linepipe (materials) at -10 deg C. API 5L cover charpy energy value up to 0deg C only.

Regards




By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...