Monday, September 14, 2020

Re: [MW:31449] Radiography

Ok Sir 

Noted.

On Mon 14 Sep, 2020, 7:36 PM Jignesh Desai, <jignesh.desai.met@gmail.com> wrote:
Ankit,

If such details are not mention in General Arrangement Drawing then you may please refer to Mechanical Data sheet or Mechanical Calculation to get these details.

On Sun, 13 Sep 2020, 10:49 Patel Ankit, <aapatel271@gmail.com> wrote:
Hello Team,

I hope all member will be fine & Healthy.

My question is How can define take radiography full or spot.

In my drawing no any data mention about radiography like (Full, Spot , No joint efficiency ).

Sir pl. Tell me if you have any reference.

Thanks,
Ankit Patel

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALR-PuzvCnHn-T5C2T%2BxVHLv7NwMSj3eJoSz6o3rfZY-%2BTsdMg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFOVsLYOBMcGH9K9x%2BC%2BSiS4Dzy6C_vH0KjNjLFWCAMKGjJ6yw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALR-Puw%2B4kp%3DMWdiYb%2BYKPKbmA59pjKJ8LJufWyGvh5ozP4a2A%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...