Dear Murali,
2" NPS OD will be 60.3 mm only. So You need separate qualification
for 2"NPS connection as per ASME Sec IX.
On 9/9/20, 'james gerald' via Materials & Welding
<materials-welding@googlegroups.com> wrote:
> I suppose you use GTAW + SMAW process.
> For GTAW you need to perform welder qualification for 2inch NPS.
> Upon deposition of 2 passes the OD varies and convince your client by
> practically measuring the OD for SMAW process
>
> Thanks & Regards
>
> J.Gerald Jayakumar
>
>
>
>
>
> On Wednesday, 9 September, 2020, 10:57:04 am GMT+7, Murali Krishnan
> <muraligkrishnan@gmail.com> wrote:
>
> Greetings,
> I have a weldolet 2" NPS X OD 82 mm, I want to use the welder qualified for
> 2 7/8 (73 mm) & over.
> Query initiated by client that as per ASME SEC IX Table QW 452.3 foot note
> (b) states that 2 7/8 in. (72mm) O.D. is the equivalent of NPS 2 1/2 (DN
> 65). In this case the welder client says welder is not qualified for 2 inch
> NPS.
>
>
> since the welder qualification essential variable is OD inline with ASME SEC
> IX, kindly advice.
>
> If any reference kindly share the same.
> Thanks Murali
>
> --
> Thanks and Best Regards, G.Murali krishnan
> Mob : +966-501487307
> Saudi Arabia
>
>
> --
> https://materials-welding.blogspot.com/
> https://www.linkedin.com/groups/122787
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/CANtiPKs%3D8_skdC4DU-H0__v9sE3CT7tq9RP0D-_RV%2B7OOuybNQ%40mail.gmail.com.
>
>
> --
> https://materials-welding.blogspot.com/
> https://www.linkedin.com/groups/122787
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/1464799251.105528.1599624753373%40mail.yahoo.com.
>
--
With Regards,
Sandeep.P.Raghavan
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFBEtQo40qedbzjzDONniuo%2BpYYD-f4cXENjZ4LHH50L9V_u5A%40mail.gmail.com.
Subscribe to:
Post Comments (Atom)
Re: [MW:35289] Welding consumable for S355J2WP material
S355 J2 WP is a weathering structural steel It has better atmospheric corrosion resistance. Use E 8018 - W1/W2 Electrodes This is regular...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment