[MW:31416] Clarification

Dear All,

Please clarify some below points.

I have previously qualified PQR, details as below.

PQR with ASME sec.IX and B31.3 and API 582.

Process - GTAW (Manual)

Base Metals - ASTM A312 TP304L to STM A312 TP304L

P.No - P8 Gr.1 to P8 Gr.1

Test coupon Thickness - 5.54 mm

First Process - GTAW - SFA - 5.22, AWS - R308LT1-5 , F.No - 6,

A.No - 8, Size of Filler .M - 2.2 , F.M.Product from - Flux-cored, Weld Metal Thickness -

1.5mm.

Second Process - GTAW - SFA - 5.9, AWS - ER308L , F.No - 6,

A.No - 8, Size of Filler .M - 2.5 , F.M.Product from - Solid, Weld Metal Thickness -

4.04 mm.

According to red highlighted (Second process) can I use to prepare WPS.

And Thickness range 1.5 mm to 8.08 mm, other all parameters in WPS shall be as above in red highlighted.

I don't want to use the first process.

Please let me clarify, if any changes, please guide me to prepare WPS.

Regards

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f927bb52-b5f0-484b-b5aa-f67b70287c1an%40googlegroups.com.

Materials & Welding