Monday, June 29, 2020

Re: [MW:31062] What is the technical explanation of : "weaving shall be three times of electrode core diameter"

Iso, ASME on repair

On Sun, 28 Jun 2020 9:48 pm Aakash, <harenathjha@gmail.com> wrote:
Hello Experts,
What is the technical explanation of : "weaving shall be three times of electrode core diameter"
or any code reference ?

Regards

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0c10f8b8-5359-4c59-907e-de6c9c3f43ado%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePpppVQwdbLP%3Do7TaD%3D8187P6jEFFD7oKr4KSeL%2BaYSow%40mail.gmail.com.

No comments:

Re: [MW:35241] Overlay welding defects

Dear Sir, The below is another type of defect,Mostly these two type of defects we faced. Regards, R.Gowtham. On Wed, Sep 11, 2024 at 1:42 PM...