Saturday, June 13, 2020

Re: [MW:30998] Filler rod selection for SS 304L to SA 335 pipe welding

Gents,
GTAW - ERNiCr-3
SMAW - ENiCrFe-3

On Saturday, 13 June 2020, 07:58:19 GMT+1, Aakash <harenathjha@gmail.com> wrote:


Hello,
Please suggest what should be the filler rod/ electrode for SS 304L to SA 335 pipe welding by gtaw and smaw process?

Regards

--
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c172ae1a-a0a6-4c7f-94e5-413fe1437324o%40googlegroups.com.
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35241] Overlay welding defects

Dear Sir, The below is another type of defect,Mostly these two type of defects we faced. Regards, R.Gowtham. On Wed, Sep 11, 2024 at 1:42 PM...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...