Re: [MW:31024] What is the difference between Non-Asbestos Gasket and Asbestos Gasket?

Asbestos Gasket normally used for a temporary purpose for cost control

ex::-during pressure test, dummy spool etc....

Non-Asbestos Gasket  used for permanent flanges 

ex:- Torued flanges , after pressure, tested lines before bolt touring.

Regards,

PETER SOLOMAN

BAHRAIN

On Wed, Jun 24, 2020 at 6:17 AM Raafat <slag2010@gmail.com> wrote:

Hello Dears,

What is the difference between Non-Asbestos Gasket and Asbestos Gasket? and for what application we can use each?

Thanks,

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/74f78f6b-75fe-49f2-a36d-7ac25b9b7954o%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMvP5swRhzUM0rQKD4kAo%3D16fmShrDBHdvTcbijeb%3D4RgLpF%3Dg%40mail.gmail.com.