Saturday, September 2, 2017

Re: [MW:26786] Reg:suitable filler wire

Smooth grind it and perform Pickling & Passivation standard ASTM A380
 
Thanks & Regards
J.Gerald Jayakumar
0091-9344954677



From: Gopi Nath <gosri2813@gmail.com>
To: materials-welding@googlegroups.com
Sent: Saturday, September 2, 2017 6:50 AM
Subject: [MW:26784] Reg:suitable filler wire

Dear sir,
I had find weld spatches after welding in machined valve body .  This  is not accepted. Material ASTM A487 Gr 4C. Need your solution
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.


No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...