Tuesday, September 26, 2017

Re: [MW:26836] regareding taper burning of electrode

Hi

I believe it's due to non concentric flux coating of electrodes. It's a manufacturing defect.

Take few electrodes from the pocket inspect visually and measure it's flux coating thickness through vernier caliper and you will find uninformed coating.

Regards
P Govindan

On Sep 26, 2017 08:10, "akshay" <akshaykulkarni.ak21@gmail.com> wrote:
when we starts welding the electrodes starts burning in taper shape please suggest improvement and reason behind it how i can overcome this problem 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...