Nothing is mentioned in GA.
Buy EIL spec says SR is reqd. For below 16 mm and NR for above 16mm.
As per code checked but fibre el. Is below 5%
On 28 Sep 2017 07:47, "PREM SHANKARDUTT NAUTIYAL" <prem_nautiyal@rediffmail.com> wrote:
Follow the heat treatment data written in your approved GA drawings.
PREM S NAUTIYAL
CELL : 9769316004
From: Pankaj Kolhe <pankaj.kolhe15@gmail.com>
Sent: Tue, 26 Sep 2017 21:19:03
To: materials-welding <materials-welding@googlegroups.com >
Subject: [MW:26837] SR equirement for Heads
so my question is shall i do SR for all thickness dish end or how to proceed.we have 6mm,10mm,12mm,16mm & 20 mm thk dish end in our job.Dear Experts,AS per IL spec.all cold formed heads need to be stress relieved.
MOC 516-70pankaj
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment