ASME Code Sections allow substitution of RTS by UT only under specific conditions but not on your case
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Prasad Rode <purode333@gmail.com>
Date: 26/03/2017 19:53 (GMT+02:00)
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:26283] Change of NDT in repairs joint
Is it allow to change the NDT method, while checking the repaired weld joint.
For example: we do the radiography of weld joints, then after repaired in some joint, due to some reason, we are performing UT.
Is it allow us or not, to accept that repaired weld joint on the basis of UT.
Hoping for valuable advice.
Regards
Prasad
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/5d70ed22-4a56-419e-9b19-c58fb6a6b075%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment