[MW:26310] Circumferential pipe weld joint resting on structural beam in process piping

Dear sir,

You can avoid such type of issue by internal drawing study.

Secondly, Do the RT of the joint and make it flush and place a shoe support below it.
In second option, you can also cut the pipe and place a piece of pipe in between shoe.
In second case , your one extra joint will be created but no issue of failure in future.
In third option, you can shift the pipe and make the joint safe.


Regards
Prasad

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/13edc846-2123-4fff-992c-0d147ace233e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.