Saturday, March 18, 2017

Re: [MW:26221] Regarding Brand of SAW wire and flux

If wire & flux are standard & identified in Sec IIC viz F7A6 EM12K; then change of brand viz Bohler or ESAB does not require requalification of WPS 

Aly

Virus-free. www.avast.com

On Fri, Mar 17, 2017 at 11:42 AM, Mohit Aggarwal <aggarwalmohit05@gmail.com> wrote:
Dear Experts,

Is it necessary to use same brand ofwore and flux for welding in SAW. Is there any effect if we will use wire and flux of different brand.


Best Regards,
Mohit Aggarwal
9873829219

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALTezPN5%2BZ--DUvJV3_2rC5qmJ0O9qhjpXF6U5y1UikU8_nQLQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOenW4iH%2BVy680_9i1S5Un293jU1cMQ42UqrUfTjqpX8ndhSzQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...