The best way is to fabricate a template. Use plywood
Sent from my BlackBerry 10 smartphone.
| From: José Juan Jiménez Alejandro Sent: Σάββατο, 13 Φεβρουαρίου 2016 - 05:26 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: [MW:24275] 2:1 Semi Elipsoidal Dish Head |
Any of you have a procedure that can provide me to measure 2: 1 Semi ellipsoidal Dish Head, according to the parameters of ASME Section VIII Division 1 (UG-32, UG-79, UG-81).
Thank you!
Ing. Jose Juan Jimenez Alejandro
Cel. 8116171750
Skype: jjjimeneza
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5ZurLfzbT26Rh-zA_x6sqPKMky6zXZ0NuWoMzywau9GboorA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment