[MW:24228] Point bend acceptance criteria for spool fabrication

Dear Expert,

Please refer to the attached picture of the 2 inch carbon steel spool & advise for the below query.

1. Acceptance criteria for the Point bend

2. Reference standard & clause number.

Br,

Samir

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f63cce96-b075-4418-90db-514b84e926a3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.