Materials & Welding: [MW:24207] Procedure qualification for AISI 4130 (Cr-Mo forging)

Tuesday, February 2, 2016

Dear Experts,

I want to qualify a procedure for material AISI 4130, in 40 mm thickness, Code of construction is ASME Sec VIII Div 1.

Please advise at what temperature the impact test is to be performed? (no specific client requirement)

The intent to use this WPS for valve repair.

Thanks

V. Dhamotharan

Inspection Engineer,

Doha Qatar

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/19211845-f5dc-4b25-960f-a1cf5e36c21d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Materials & Welding