Hi
There is nothing to do. The test is accepted.
Regards
On Sat, Nov 7, 2015 at 4:24 PM, 'ahmed boh' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Hi,--I am working in pipeline project API1104.I heve one speciemen breaks on the weld in tension test for mechanized welding operator with filler metal and the tension strength was greater the SMTS.pls advise what we should do in this case?ahmed
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/94f6694b-637f-4cbf-a89e-eac19f4910d0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
M. Shokri Arfaei
ISA-ISTS - Metallurgy Lab. Manager
ASNT NDT Level III
International Welding Engineer
Tel.: +98 21 66282127
Fax: +98 21 66282779
Mob.:+98 912 1394023
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAC8uMttWVnDvwraTr%3DOjKWQ2Gqhv8kAAfuNdKZemfCmtG0qiQg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment