if the breaking tensile strength is more than the base metal, then no problem
In PQR , write that "Fracture in Weld "
that's all
On Sunday, November 8, 2015 at 9:43:31 AM UTC+5:30, ahmed boh wrote:
-- In PQR , write that "Fracture in Weld "
that's all
On Sunday, November 8, 2015 at 9:43:31 AM UTC+5:30, ahmed boh wrote:
Hi,I am working in pipeline project API1104.I heve one speciemen breaks on the weld in tension test for mechanized welding operator with filler metal and the tension strength was greater the SMTS.pls advise what we should do in this case?ahmed
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/8341587f-4c0f-457f-8cdf-0b2e90d3861e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment