Dear Sri,
Please refer to relevant of ASME B16.5 that is attached.
Best Regards,
Zarei
On Wed, Nov 4, 2015 at 1:02 PM, sri latha <xsrilatha@gmail.com> wrote:
--Hi,
Can anyone share a info. about 900RTJ AND 1500RTJ?
Can we use 900 RTJ FLAN for upto 3"? I can see in piping spec that upto 2" is 1500 and above 2" is 900# and material is same. Is there any difference between construction of 900# and 1500# rating RTJ flanges?
Thanks in advance Jsri
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/214feee3-3361-40a1-97ce-fdef96f0d50f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABMh%3Db1Wk62fWXrfrc2MWuDmbwtLviSuEVfWNR0AcrY93HwqbA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment