Sunday, November 15, 2015

[MW:23881] Allowable Tube Wall Reduction Tube-to-Tubesheet Joints expended in 2 grooves and seal welded

Dear experts
 Please let me know the Allowable Tube Wall Reduction Tube-to-Tubesheet Joints expended in 2 grooves and seal welded 

Tube is SA179 ,20 mm OD & 2 mm thick
Tube sheet SA299 Gr B , 20.20 +_ 0.05 mm hole dia with 2 grooves inside the hole 

Please also share the applicable clause of TEMA or ASME stand.

Regards
Pushpraj Anand
  

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABirsxM07LnRJeNCp3auZQjagWV%2BarPpU%2B3aW5HEbsxb9CnT5A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...