Dear Experts,
-- Hot tensile test has given in ASME Sec II part D upto 525°C for all material.
In our case design temperature is 550°C.(material 1.25Cr 0.5 Mo-Si SA -335)
Question : what is the acceptable tensile/yield values above 525°C? (code allows only interpolation not extrapolation)
Regards
Selastine Sudhakar
9843188388
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9847c2d5-5454-41b4-9972-05d892e1a406%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment