Re: [MW:21630] Query Regarding MPI Test

Hi,

Please find  the attached guideline might be useful to you.

 

Thanks & Regards,

(Karthik)

Karthikeyan.S

QA/QC Manager

German-Thai Boiler Engineering Cooperation Limited.

Rayong Factory ;

379 Moo.6 Soi 8, Tambol Pananikom,

Nikompattana, Rayong 21180 THAILAND

Tel : +66 38 897 035-9 Ext. 137

Fax : +66 38 897 034

Hand Phone: 0066 892512282

On Wednesday, August 13, 2014 10:07 PM, Kadir godil <kadirgodil@gmail.com> wrote:

for deep suited defects, one has to go for volumatric methods such as UT, RT. MPI can sense only upto 3-4 mm deep defects.

On Tue, Aug 12, 2014 at 12:17 PM, shaikh ahmed <ahmedmech77@gmail.com> wrote:

Dear Sir,
 

Kindly Suggest.

MPI used for S/F & Sub surface defect.
 
Regarding Sub Surface defect if suppose we have 20mm thickess Weld Upto which thickess this test able to sense a Subsurface defect in Weld.please provide a Code refernce if possible.
 
waiting.
 
kind regds,
Shaikh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.