If you have used 304 clad then it is not adviceable but if u r going with 304L then u can comfortablly do that. Mostly cladding is carried out with Low carbon grades so check that first.
Regards,
Hardik Desai
On Aug 1, 2014 11:20 AM, "HEMANT SUTHAR" <hemant.qac@rediffmail.com> wrote:
-- Dear Sir,I have to do PWHT after explosive bonding and some portion overlay welding in heat exchanger. We have to do overlay and weld cladding of SS 304 on SA 336 Gr. F5. PWHT heating cycle is 720 C at 2 hours.Material : SA 336 Gr F5 + SS 304 CLAD
now my doubt is if we will do PWHT in sensitization range so that there is chance of IGC in SS material and SS clading will not fulfill its corrosin resistance purpose.so kindly pls suggest we can do or not do???Thanks,Hemant Suthar7600096712--
Know More >
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment