Re: [MW:20716] Re: B31.3 Piping Ovality limits

attached and i hope u get it

OUR BEST REGARDS

AHMAD AND MOHAMAD REDA

01223964394 & 01223932379

SENIOR QA-QC

PETROJET

On Tuesday, 29 April 2014 15:22:15 UTC+2, Mok wrote:

Many Thanks Amer,

Could you resend the snap shot on an other format.
I can't get it

Thanks

2014-04-29 10:24 GMT+02:00 AHMAD&MOHAMAD REDA <amred...@gmail.com>:

Dear mok
there is no straight mention to ovality as per B31.3 and the only presence to diameter tolerance is the next snapshot (332.2 bending)
and i think it can works

 

OUR BEST REGARDS

AHMAD AND MOHAMAD REDA

01223964394 & 01223932379

SENIOR QA-QC

PETROJET 

On Sunday, 27 April 2014 19:51:49 UTC+2, Mok wrote:

Dear Experts,
What are the ovality limits for piping as per B31.3?
Many thanks

Sent from my ThinkPad S230u

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Meilleures salutations

MOKRANI Lassaad

Consultant Civil Engineer

Tunisia

00216 20 649 755
http://www.linkedin.com/pub/lassaad-mokrani/16/364/907


















P     Pensez environnement! N'imprimez ce mail que si c'est vraiment nécessaire
Please consider your environmental responsibility before printing this e-mail


This e-mail is confidential and it is intended only for the addressees. Any
review, dissemination, distribution, or copying of this message by persons
or entities other than the intended recipient is prohibited. If you have
received this e-mail in error, kindly notify us immediately by telephone or
e-mail and delete the message from your system. The sender does not accept
liability for any errors or omissions in the contents of this message which
may arise as a result of the e-mail transmission

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.