ERNiCr3 or Inconel 625
On Thu, May 29, 2014 at 7:46 AM, ARUNABH BERA <bonjoe23@gmail.com> wrote:
Thank you Pradip SirThank you so much for your valuable advice. would definately bring in notic to the EIL Standard Development group. Kindly clarify one more doubt, as we know that P-91 is poor to weld corrosion, what could be the possible corrosion and failure mechanism if we use ER 309 and how usage of ER NiCr3 helpsWarm RegardsArunabh
On Tuesday, May 27, 2014 4:42:10 PM UTC+5:30, ARUNABH BERA wrote:Dear AllKindly clarify the doubts:Sir in Ethylene Cracker Furnace at one of the Petrochemical Plant, we have a hook-up between P-91 and SS304H. Here we are using ER309 as the filler.Is it acceptable, if not what can be the probable problems associated with the filler selection and what are the solutions
RegardsArunabhEngineers India Limited--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment