applicable standard is ASME B 16.9 & MSS SP-45
On Tue, Dec 24, 2013 at 1:07 PM, GENE MATSKO <g_matsko@yahoo.com> wrote:
It is the responsibility of the designer or operator to determine what minimum diameter he can tolerate.Check B31.4 for information and tech. guidance. I hope this helps.IGene Matsko
On Monday, December 23, 2013 11:55 PM, shaikh ahmed <ahmedmech77@gmail.com> wrote:
Dear Expert,Below Specified Elbows have deforms on surface. (Max. 5.5mm dent)A234-WPB 84" 90D Elbow 12.7T – 12EacONSTRUCTION code B31.3 -pROCESS piping84" 90 Degree LR Elbow having deformed surface. The pictures below attached .Request you to provide the Valuble Suggestion and action required to be taken and also provide any code code refernce.thanks in advance for your valuable Suggestion.Best Regards,
Suk-Hoo, HA (하석후)Piping Supervisor / SADARA MFC Piping Dep'tA : P.O. Box 606, Jubail 31951 Daelim Saudi Arabia Co.,LtdExt. : 151DAELIM SAUDI ARABIA CO., LTD.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment