On Sunday, 15 December 2013 16:01:17 UTC+3, Hamed Malekan wrote:
Dear Sir
It's an common practice and possible , but please consider that you should advise this matter to valve manufacturer and shall be produced as per your request , perpendicular or parallel
BR
From: material...@
googlegroups.com [mailto:material...@googlegroups.com ] On Behalf Of Rovshan Nabiyev
Sent: Sunday, December 15, 2013 3:21 PM
To: material...@googlegroups.com
Subject: [MW:19601] 20" Ball Valve actuator direction
Dear Experts
Could You advice please.
Is it possible to install actuator as indicated in attached picture?
I mean not parallel to pipe but perpendicular.
Thank you all for reply
Rovshan
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com .
For more options, visit https://groups.google.com/groups/opt_out .
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Comments