Dear friend,
In Malaysia we inject helium gas and we use helium detector sniffing
on above ground which is very sensitive to detect the under ground
pipe leak.
On 1/8/13, Materials & Welding <materials-welding@googlegroups.com> wrote:
> Dears Experts
> good day for all , cane anyone help to found the good technology for the
> leak detection for under ground multi products pipe line
>
> *Kindest regards,*
>
> Siddig Hamid Mohammed
>
> Pipe Line Repair Section Head.
>
> *Sudanese Petroleum Pipelines Co. (SPPC)*
>
> *one of Petrolines for Pipes & Engineering Work Holding Co.*
>
> T +249 187 027223 IP Phone Ext. 7223
>
> F +249 183 027120
>
> E
> sdhamid@sppc-sd.com<https://exch.sppc-sd.com/owa/redir.aspx?C=1593b07e75614fdaaeabedd882250351&URL=mailto:sdhamid%40sppc-sd.com>
> W
> www.sppc-sd.com<https://exch.sppc-sd.com/owa/redir.aspx?C=1593b07e75614fdaaeabedd882250351&URL=https://exch.sppc-sd.com/owa/redir.aspx?C%3d1006ba4102f644a5ad915de013e29682%26URL%3dhttp%253a%252f%252fwww.sppc-sd.com%252f>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>
>
--
Best Regards
Mazlan Abd Aziz
Freelance Inspector
Email: mazlanaziz66@gmail.com
mazsp66@yahoo.com
Mobile:+6019-4772079
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34920] Tubesheet Hole step
Hello Team, I have one question any tolerance given for tubesheet Hole step. Please do needful. Regards, AP -- https://materials-...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment