dear mohammed,
you can PL2500 leak noice correlator.its high tech instruments..you
may need to sub contract this works.
Regards,
Mohd.
On Jan 8, 9:08 am, mazlan abd aziz <mazlanazi...@gmail.com> wrote:
> Dear friend,
> In Malaysia we inject helium gas and we use helium detector sniffing
> on above ground which is very sensitive to detect the under ground
> pipe leak.
>
> On 1/8/13, Materials & Welding <materials-welding@googlegroups.com> wrote:
>
>
>
>
>
> > Dears Experts
> > good day for all , cane anyone help to found the good technology for the
> > leak detection for under ground multi products pipe line
>
> > *Kindest regards,*
>
> > Siddig Hamid Mohammed
>
> > Pipe Line Repair Section Head.
>
> > *Sudanese Petroleum Pipelines Co. (SPPC)*
>
> > *one of Petrolines for Pipes & Engineering Work Holding Co.*
>
> > T +249 187 027223 IP Phone Ext. 7223
>
> > F +249 183 027120
>
> > E
> > sdha...@sppc-sd.com<https://exch.sppc-sd.com/owa/redir.aspx?C=1593b07e75614fdaaeabedd8822...>
> > W
> >www.sppc-sd.com<https://exch.sppc-sd.com/owa/redir.aspx?C=1593b07e75614fdaaeabedd8822...>
>
> > --
> > To post to this group, send email to materials-welding@googlegroups.com
> > To unsubscribe from this group, send email to
> > materials-welding+unsubscribe@googlegroups.com
> > For more options, visit this group's bolg at
> >http://materials-welding.blogspot.com/
> >http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=1227...
>
> > The views expressed/exchnaged in this group are members personel views and
> > meant for educational purposes only, Users must take their own decisions
> > w.r.t. applicable code/standard/contract documents.
>
> --
> Best Regards
>
> Mazlan Abd Aziz
> Freelance Inspector
> Email: mazlanazi...@gmail.com
> mazs...@yahoo.com
> Mobile:+6019-4772079
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34919] Welder qualification certificate
Dear All anyone can share a format for welder certificate and card format Thanks & Best Regards Saleem manhappulath Mob:+9665...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment