In process inspection can be done for that joint as per ASME B 31.3.
Radiographic testing of that joint can be done in consultation with client/owner and review can be done as Golden Joint/ Tie in joint (stringent inspection criteria in discussion with client to be followed).
Regards,
Hareesh K v
+91-8306703707
On Sun, Dec 2, 2012 at 8:40 AM, PK M <pkmqaqc@gmail.com> wrote:
Dear Experts,--A certain joint cut & re weld in spool which hydro test completed, is there any methods & procedure to accept that joint without hydro test again?
Thanks,
Pkm.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment