Hi Vino,
The default cutting method is plasma cutting.High power Oxy-fuel cutting is also feasible, but you may have to remove the wider kerf width by grinding. See the attached article for your reference.
Thanks.
Pradip Goswami,P.Eng.IWE
Welding & Metallurgical Specialist & Consultant
.
On 6 February 2012 18:36, Vino Varghese <vinopvarghese@gmail.com> wrote:
--Dear Technical Experts,
We are a company fabricating ASME Pressure Vessel and require your support for the subject matter for our project.
The base material is SA 516 Gr 70, 30 mm thick – Arcelor Mtthal
The Clad Material is Alloy 825, 4 mm thick – Thyseen Krupp
Process- Explosion Bonding
We require your assistance to understand the correct methodology to cut the Explosion Bonded Plate without any damage.
Hope to see you technical support as usual in this matter and any specific precaution to be considered during the thermal cutting process of above said plates. Please share any Procedure for subject.
Thanks & Regards
Vino - Doha, Qatar
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment