Wednesday, February 2, 2011

[MW:9696] RE: P no for SA-194 Grade 2H nuts

Dear All,

Many times we find in heat Exchangers that SA-194 Gr.2H nut is used with bolting bar in tack welding condition.

Since these nuts are not allowed for welding, which nuts can be used in their place as per ASME Sec-IX?

SA-36 Nuts are difficult to manufacture and not readily available on time. This causes delay in the projects.

Please suggest.

 

Best regards,

 

Alam

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34919] Welder qualification certificate

Dear All     anyone can share a format for welder certificate and card format        Thanks & Best Regards Saleem manhappulath Mob:+9665...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...