Re: [MW:4238] Welding of Aluminum plate grade 6082 T

Dear Elshan,

 

Can you give me some information on the following;

Thisckness of the material

Type of welding proces and joint type.

Is the crack in the weld material or in the base material.

Has there been made an X-ray, and what is the result?

What is the required minimum yield strength of the welded connection?

 

best regards,

 

Dick Overkleeft

2010/2/2 Elshan Feyzullayev <elshan_f@hotmail.com>

Dear friends,
 
I need to run the new WPSin Aluminium steel plate using the attached grade of Aluminum plate.

 
How many times I have tried but I can not get the acceptable results from bend test.
 
It is broken after slight bending.
 
Can you help me please how to weld it to get the acceptable results from bending?
 

The wire I am using is ER5356 which is reccommended for this type of AL.
 
Best regards,

---

Hotmail: Powerful Free email with security by Microsoft. Get it now.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.