Thursday, April 23, 2009

[MW:2026] Re: 2018] qualification of wps

hi
thank you for response,but changing from multi pass to single pass is a supplementary variable


From: Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>
To: materials-welding@googlegroups.com
Sent: Thursday, April 23, 2009 9:49:53 AM
Subject: [MW:2019] RE: 2018] qualification of wps

Yes, Refer Table 4.1

 


From: materials-welding@googlegroups.com [mailto: materials-welding@googlegroups.com ] On Behalf Of Ali Asghari
Sent: Thursday, April 23, 2009 11:13 AM
To: materials-welding@googlegroups.com
Subject: [MW:2018] qualification of wps

 

Hi

according to AWS D1.1 ,a groove weld in 6G position is qualified.now is it possible a single pass fillet weld wps qualified by using   qualifid wps groove weld?(for qualification of groove weld ,impact tests are done )

regard advance

 








--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...