Thursday, April 23, 2009

[MW:2021] Re: WPS

I am not agree with Mr Endri as Base metal is essential criteria but check for WPS Qulaification range as P1 through P11 and A106 and A333 falls in P1-Group1 Material and if anyone wants to use A106 WPS for A333 Gr 6 without Impact testing PQR same WPS can be useful.
 
To Qualify A333-6 Material with Impact test as Supplementary Essential requirement they need to requalify PQR with Impact test requirement but thay can use same WPS
 
Abhijit

--- On Thu, 4/23/09, Endri Prasetyo <endri.prasetyo@gmail.com> wrote:

From: Endri Prasetyo <endri.prasetyo@gmail.com>
Subject: [MW:2017] Re: WPS
To: materials-welding@googlegroups.com
Date: Thursday, April 23, 2009, 5:45 AM

Parviz,
 
The base material is one of essential variable, if any difference of base metal so the WPS is different too.
 
regards,
Endri

On Wed, Apr 22, 2009 at 7:14 PM, parviz farhadi <parvizfarhadi@gmail.com> wrote:
Dear All,
 
Is it possible to use WPS of ASTM A106 Grade B and its PQR for ASTM A333 Gr 6?
 
Regards,
Parviz





--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...