[MW:1182] RE: 1180] Re: 1178] DENTS AND FLAT

refer para 6.5.4: Local deviations, the correct terms would be peaking and banding

-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com]On Behalf Of carlos oliveros
Sent: Wednesday, October 01, 2008 5:38 PM
To: materials-welding@googlegroups.com
Subject: [MW:1180] Re: 1178] DENTS AND FLAT

Excuse me the code is API 620

carlos oliveros

On Wed 01/10/08 10:33 , "Bathula Raghuram \(Mumbai - PIPING\)" R.Bathula@ticb.com sent:

What is your construction code?

-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com]On Behalf Of carlos oliveros
Sent: Wednesday, October 01, 2008 4:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:1178] DENTS AND FLAT

Dears Friends I want know what is tolerances in Tanks about Dents and Flattening (storage tanks)

Thanks

REGARDS
carlos oliveros

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---