[MW:1243] Re: 1240] Which WPS can be used

Use WPS w/o PWHT!

-----Original Message-----
From: kataiah@bilfal.com [mailto:kataiah@bilfal.com]
Sent: Monday, October 27, 2008 9:07 AM
To: Bathula Raghuram (Mumbai - PIPING)
Subject: Fw: [MW:1242] RE: 1240] Which WPS can be used

Dear Sir,

Iam not going to do PWHT  after welding.

reards

----- Forwarded by Kataiah/BelleliSA on 27/10/2008 11:05 ص -----

"Bathula Raghuram \(Mumbai - PIPING\)" <R.Bathula@ticb.com> Sent by: materials-welding@googlegroups.com 27/10/2008 10:47 ص Please respond to materials-welding

To:        <materials-welding@googlegroups.com>         cc:                 Subject:        [MW:1242] RE: 1240] Which WPS can be used

it depends on after treatment of this weld, is this weld required or subjected to PWHT?
-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com]On Behalf Of kataiah@bilfal.com
Sent: Sunday, October 26, 2008 9:38 AM
To: materials-welding@googlegroups.com
Subject: [MW:1240] Which WPS can be used


Dear Frinds ,

I have a requirement to weld  Stress relievedCS  plate # normal CS Plate.

Which WPS can is use to weld such combination ( i mean a WPS with PWHT or with out PWHT).

ASME is refering anywhere which type to be used?

What is the logic to use perticular type?.

Regards

P.K.
Bilfal Industries. 

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---