As per QW200.4(b) it is mandatory that your GTAW PQR thickness should
be minimum 13 mm. than you use GTAW as root as qualified in PQR.
Regards
Jitendra
On Fri, Mar 21, 2008 at 2:11 PM, sajeev c.g <sajeevmech@yahoo.com> wrote:
> Dear all,
>
> I have to prepare a WPS from two PQR's as per section IX.
> PQR 1 qualified in 10mm coupon full GTAW
> PQR 2 qualified in 40mm coupon SMAW+SAW(20mm deposit each)
>
> Can i write a WPS to weld GTAW (root) + SMAW+SAW?
> As per QW200.4(b) is it mandatory that the PQR 1 will be qualified in 13mm
> minimum to write a WPS as above?
>
> Regards
> sajeev
>
> ________________________________
>
> Looking for last minute shopping deals? Find them fast with Yahoo! Search.
> >
>
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment