Friday, March 7, 2008

[MW:655] Re: Consumables for API 5L GR X65

 
 
De: materials-welding@googlegroups.com
Para: materials-welding@googlegroups.com
Copia: piping_valves@yahoogroups.com
Fecha: Fri, 7 Mar 2008 14:18:16 +0530
Asunto: [MW:654] Consumables for API 5L GR X65

You can use EX010-P1 (Pipeline) Electrodes. These  electrodes have been designed primarily for welding typical high-strength, pipe butt joints in the vertical welding position with downward or upward progression.

This combination is best suited for achieving full penetration and radiographic quality for the downhill welding of butt joints when the axis of the pipe is in the horizontal position.

 

From: dharmesh arvadia [mailto:dharmeshedc@yahoo.co.in]
Sent: Friday, March 07, 2008 1:04 PM
To: materials-welding@googlegroups.com
Cc: piping_valves@yahoogroups.com
Subject: API 5L GR X65

 

 

Dear group.
 
   Kindly advise me which electrod i can use for pipe to pipe welding 
for material API 5L GR X65
   WITH REASON.
 
   Best regards.
   Dharmesh Arvadia.
   You can use in process SMAW E-8010, Down Hill or Up Hill pending  if is API 1104 or ASME B31.3 I am using in Gas Plant
GTAW/SMAW ER-70S-X/E-8018G
 
 



--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...