Is it a construction site or a running process plant, where you are looking for complete LDAR solutions?
for e.g. API MPMS 19.3 PART D covers Test Method for the Measurement of Deck-Seam Loss Factors for Internal Floating-Roof Tanks
fugitive emissions from equipment in facilities that use, manufacture or transport toxic and dangerous fluid products are genearally requested for valves (ofcourse valves are the single largest source for this emissions), sealing systems used in rotating machinary (for e.g could be pump shaft sealing or compressor or could be a mechanical seal of reactor etc.)
it is very important for any piping class/material specialist to look in to this requirement while selecting the materails like gaskets or any sealing material, surface finish of flange etc.
-----Original Message-----
From: Ramesh C [mailto:cramesh1971@gmail.com]
Sent: Mon 03/03/2008 20:27
To: materials-welding@googlegroups.com
Subject: Re: [MW:632]
can any body send the details of *Fugitive emission test equipment*
**
Thanks & regards,
Ramesh.C
L&T, KPM-site
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
Comments